Side Loading

Gösterilen sonuç sayısı: 4

  • WRAP – 100

    Modular, compact and flexible side load case wrapper

    Side loading, modular, compact and flexible case wrap solution, designed for medium capacity.

    Wraparound packing type unit for intermittent operation.

    The Wrap 100 packer has 3 stations, for separating the shape of the case, for the introduction of additional products, shaping of the case, prior to product introduction.

    This model incorporates servomotors to ensure optimization of the movements and maximize speed. Suitable for production of up to 22 cases/minute, this model is distinguished both by the ease of formatting changes, its accessibility to all mechanisms and easy maintenance.

    Due to a flexible and modern design, the Wrap 100 exhibitors can make the top packaging such as protective tray caps and cases fully surround the product inside.

    A wide range of items and accessories are available to order, stack and fit different types of packaging, adapting each of them according to their characteristics and required production.

    The frame has been designed to be as compact and robust as possible with polycarbonate doors which offer a complete visual inspection from any view around the machine. The doors allow free and unhindered access inside the machine, including safety switches, in case of opening. The work cycle of the cases takes place in a single layer. This is an important factor, since the product is handled without drops or falls.

    The closed system is executed by Hot Melt, with automatic adjustment of dose and length of lines through the touch screen. The storage material has a capacity of approximately 160 sheets. It has a minimum level cargo detector which signals by an audio or visual warning. Adjusting the size of the sheet is achieved using a crank with digital displays. Optionally, you can provide greater capacity.

    Touchscreen
    The touch screen and PLC are scheduled as per the standard modular OMAC and PACK ML architecture. The equipment is controlled through a multi purpose touch screen, providing the operator with the information necessary for proper handling, operations, format change and adjustment. Also, through different levels of password protection on the screen, you can modify the main parameters of the equipment. The glue tail and its length can be adjusted through the touch device to ensure the correct closure of the case and minimize the consumption of hot melt.

    CHARACTERISTICS

    • Compact and ergonomic design
    • Easy access and cleaning of all parts
    • Machine driven by servo motor.
    • Modular structure is composed of a grouped unit to create the grouping device and to form a case unit for product filling, sealing and bonding.
    • Various types of presentation of cases available, depending on product size, shape, speed, and configuration of the case (case wrap, tray, tray and lid…)
    • Optional high-capacity storage and a range of up to 500 sheets of cardboard.
    • Optional automatic transmission format.
    • PackML standard programming
    • Forming and closing perfectly square cases.
    • Height of case store for ergonomic working criteria.
    • Motorized arm equipped with suction cups to ensure the removal of the plate from stock.
    • Positively guided product and cases.
    Devamını oku
    Quick View

  • WRAP – 200

    Side loading modular, compact and flexible wrap case, designed for medium and high speed capacity

    Side loading, modular, compact and flexible case wrap solution, designed for medium capacity.

    Wraparound type packing unit for intermittent operation.

    The Wrap 100 packer has 3 stations, for separating the shape of the case, for the introduction of additional products, shaping of the case, prior to product introduction.

    This model incorporates servomotors to ensure optimization of the movements and maximize speed. Suitable for production of up to 22 cases/minute, this model is distinguished both by the ease of formatting changes, its accessibility to all mechanisms and easy maintenance.

    A wide range of items and accessories are available to order, stack and fit different types of packaging, adapting each of them according to their characteristics and required production.

    The frame has been designed to be as compact and robust as possible with polycarbonate doors which offer a complete visual inspection from any view around the machine. The doors allow free and unhindered access inside the machine, including safety switches, in case of opening. The work cycle of the cases takes place in a single layer. This is an important factor, since the product is handled without drops or falls.

    The closed system is executed by Hot Melt, with automatic adjustment of dose and length of lines through the touch screen. The storage material has a capacity of approximately 160 sheets. It has a minimum level cargo detector which signals by an audio or visual warning. Adjusting the size of the sheet is achieved using a crank with digital displays. Optionally, you can provide greater capacity.

    Touchscreen
    The touch screen and PLC are scheduled as per the standard modular OMAC and PACK ML architecture. The equipment is controlled through a multi purpose touch screen, providing the operator with the information necessary for proper handling, operations, format change and adjustment. Also, through different levels of password protection on the screen, you can modify the main parameters of the equipment. The glue tail and its length can be adjusted through the touch device to ensure the correct closure of the case and minimize the consumption of hot melt.

    CHARACTERISTICS

    • Compact and ergonomic design
    • Easy access and cleaning of all parts
    • Machine driven by servo motor.
    • Modular structure is composed of a grouped unit to create the grouping device and to form a case unit for product filling, sealing and bonding.
    • Various types of presentation of cases available, depending on product size, shape, speed, and configuration of the case (case wrap, tray, tray and lid…)
    • Optional high-capacity storage and a range of up to 500 sheets of cardboard.
    • Optional automatic transmission format.
    • PackML standard programming
    • Forming and closing perfectly square cases.
    • Height of case store for ergonomic working criteria.
    • Motorized arm equipped with suction cups to ensure the removal of the plate from stock.
    • Positively guided product and cases.
    Devamını oku
    Quick View

  • WRAP – 50

    Side loading, modular, compact and flexible wrap case, designed for medium capacity packer

    Side loading, modular, compact and flexible case wrap solution, designed for medium capacity.

    Within the end of line equipment range, Prodec has a new wraparound case packer model for intermittent operations over a range of average yields with 2 workstations.

    Regardless of its simplicity and modern design, its main feature is based on the possibility of transformation from a wraparound concept packaging to RSC case or vice versa, with minor modifications to adapt it. This

    Concept was developed by the engineering team of Prodec and is based on the need for reliable equipment which is also highly flexible.

    Simple and easy to use, the Wrap 50 enables production of up to 12 cases/min.

    It is designed to manipulate flexible, rigid or semi-rigid containers, in each case adapting the system for a more convenient grouping according to the characteristics of the container.

    The frame has been designed to be as compact and robust as possible with polycarbonate doors which offer a complete visual inspection from any view around the machine. The doors allow free and unhindered access inside the machine, including safety switches.

    The work cycle of the cases takes place in a single layer. This is an important factor, since the product is handled without drops or falls.

    The closed system is executed by Hot Melt, with automatic adjustment of dose and length of lines through the touch screen. The storage material has a capacity of approximately 160 sheets. It has a minimum level cargo detector which signals by an audio or visual warning. Adjusting the size of the sheet is achieved using a crank with digital displays. Optionally, you can provide greater capacity through a horizontal store motor.

    Touchscreen
    The touch screen and PLC are scheduled as per the standard modular OMAC and PACK ML architecture. The equipment is controlled through a multi purpose touch screen, providing the operator with the information necessary for proper handling, operations, format change and adjustment. Also, through different levels of password protection on the screen, you can modify the main parameters of the equipment. The glue tail and its length can be adjusted through the touch device to ensure the correct closure of the case and minimize the consumption of hot melt.

    CHARACTERISTICS

    • Compact and ergonomic design
    • Easy access and cleaning of all parts
    • Machine driven by servo motor.
    • Modular structure is composed of a grouped unit to create the grouping device and to form a case unit for product filling, sealing and bonding.
    • Various types of presentation of cases available, depending on product size, shape, speed, and configuration of the case (case wrap, tray, tray and lid…)
    • Optional high-capacity storage and a range of up to 500 sheets of cardboard.
    • Optional automatic transmission format.
    • PackML standard programming
    • Forming and closing perfectly square cases.
    • Height of case store for ergonomic working criteria.
    • Motorized arm equipped with suction cups to ensure the removal of the plate from stock.
    • Positively guided product and cases.
    Devamını oku
    Quick View

  • WRAP – 60

    Side loading modular, compact and flexible wrap case, designed for medium capacity packer

    Side loading, modular, compact and flexible case wrap solution, designed for medium capacity.

    Within the end of line equipment range, Prodec has a new wraparound case packer model for intermittent operations over a range of average yields with 2 workstations.

    Regardless of its simplicity and modern design, its main feature is based on the possibility of transformation from a wraparound concept packaging to RSC case or vice versa, with minor modifications to adapt it. This concept was developed by the engineering team of Prodec and is based on the need for reliable equipment which is also highly flexible.

    Simple and easy to use, the Wrap 50 enables production of up to 12 cases/min.

    It is designed to manipulate flexible, rigid or semi-rigid containers, in each case adapting the system for a more convenient grouping according to the characteristics of the container.

    The frame has been designed to be as compact and robust as possible with polycarbonate doors which offer a complete visual inspection from any view around the machine. The doors allow free and unhindered access inside the machine, including safety switches.

    The work cycle of the cases takes place in a single layer. This is an important factor, since the product is handled without drops or falls.

    The closed system is executed by Hot Melt, with automatic adjustment of dose and length of lines through the touch screen. The storage material has a capacity of approximately 160 sheets. It has a minimum level cargo detector which signals by an audio or visual warning. Adjusting the size of the sheet is achieved using a crank with digital displays. Optionally, you can provide greater capacity through a horizontal store motor.

    Touchscreen
    The touch screen and PLC are scheduled as per the standard modular OMAC and PACK ML architecture. The equipment is controlled through a multi purpose touch screen, providing the operator with the information necessary for proper handling, operations, format change and adjustment. Also, through different levels of password protection on the screen, you can modify the main parameters of the equipment. The glue tail and its length can be adjusted through the touch device to ensure the correct closure of the case and minimize the consumption of hot melt.

    CHARACTERISTICS

    • Compact and ergonomic design
    • Easy access and cleaning of all parts
    • Machine driven by servo motor.
    • Modular structure is composed of a grouped unit to create the grouping device and to form a case unit for product filling, sealing and bonding.
    • Various types of presentation of cases available, depending on product size, shape, speed, and configuration of the case (case wrap, tray, tray and lid…)
    • Optional high-capacity storage and a range of up to 500 sheets of cardboard.
    • Optional automatic transmission format.
    • PackML standard programming
    • Forming and closing perfectly square cases.
    • Height of case store for ergonomic working criteria.
    • Motorized arm equipped with suction cups to ensure the removal of the plate from stock.
    • Positively guided product and cases.
    Devamını oku
    Quick View
X